Cruise Control System DTCS
CRUISE CONTROL DIAGNOSTIC TROUBLE CODE (DTC) LIST
| Cancel code | Description | Reference |
|---|---|---|
| 11 | Main switch of cruise control command switch is turned to OFF, and then the cruise control is released. | This code is displayed without operating the main switch. < Refer to 11 , Diagnostic Procedure with Cancel Code. > |
| 12 | Stop light switch or brake switch is turned to ON, and then the cruise control is released. | This code is displayed without depressing the brake pedal. < Refer to 12 , Diagnostic Procedure with Cancel Code. > |
| 13 | Clutch switch is turned to ON, and then the cruise control is released. | This code is displayed without depressing the clutch pedal. < Refer to 13 , Diagnostic Procedure with Cancel Code. > |
| 14 | Neutral position switch is turned to ON, and then the cruise control is released. | This code is displayed without shifting to neutral position. < Refer to 14 , Diagnostic Procedure with Cancel Code. > |
| 15 | Cancel switch is turned to ON, and then the cruise control is released. | This code is displayed without operating the cancel switch. < Refer to 15 , Diagnostic Procedure with Cancel Code. > |
| 16 | Ignition switch is turned to OFF, and then the cruise control is released. | This code is displayed without operating the ignition switch. < Refer to 16 , Diagnostic Procedure with Cancel Code. > |
| 21 | When the ignition switch is turned to ON, each switch of cruise control command switch is already turned to ON. | This code is displayed when the ignition switch is turned to ON without operating the cruise control command switch. < Refer to 21 , Diagnostic Procedure with Cancel Code. > |
| 22 | Malfunction of vehicle speed signal variation is detected. | < Refer to 22 , Diagnostic Procedure with Cancel Code. > |
| 24 | Open circuit of the cruise control switch is detected during cruise driving. (The system is judged as model without cruise control.) | This code is displayed with normal operation. < Refer to 24 , Diagnostic Procedure with Cancel Code. > |
| 31 |
|
Cruise in 2nd shift position or more. < Refer to 31 , Diagnostic Procedure with Cancel Code. > |
| 32 |
|
This code is displayed, though the vehicle speed is increased to the speed available for cruise set and set operation was performed again. < Refer to 32 , Diagnostic Procedure with Cancel Code. > |
| 34 | The vehicle has been driven at higher speed than set vehicle speed for an abnormally long time (approximately 10 minutes) during cruise driving. | This code is displayed when driving for a long period of time at higher speed than appropriate cruise set vehicle speed by operating accelerator pedal. In this case, the cruise setting is deactivated. < Refer to 34 , Diagnostic Procedure with Cancel Code. > |
| 35 | Set vehicle speed cannot be kept because of some reasons (steep uphill, parking brake, abnormal decrease of engine output, etc.) during cruise driving. | This code is displayed when driving condition is not suitable for cruise control. Perform cruise set operation again after clearing the possible cause. < Refer to 35 , Diagnostic Procedure with Cancel Code. > |
| 41 | Vehicle dynamics control (VDC) or TCS is operated during cruise driving or cruise setting. | This code is displayed when driving condition is not suitable for cruise control. Perform cruise set operation again after clearing the possible cause. < Refer to 41 , Diagnostic Procedure with Cancel Code. > |
| 43 | ABS or Vehicle dynamics control (VDC) system malfunction is detected during cruise driving or cruise setting. | < Refer to 43 , Diagnostic Procedure with Cancel Code. > |
| 44 | Body integrated unit system malfunction is detected during cruise driving or cruise setting. | < Refer to 44 , Diagnostic Procedure with Cancel Code. > |
| 45 | Combination meter malfunction is detected during cruise driving or cruise setting. | < Refer to 45 , Diagnostic Procedure with Cancel Code. > |
| 61 | Malfunction in the stop light & brake switch is detected. | < Refer to 61 , Diagnostic Procedure with Cancel Code. > |
| 62 | Neutral position switch malfunction is detected. | < Refer to 62 , Diagnostic Procedure with Cancel Code. > |
| 63 | Malfunction of vehicle speed signal variation is detected. | < Refer to 63 , Diagnostic Procedure with Cancel Code. > |
| 64 | Malfunction related to engine is detected. | < Refer to 64 , Diagnostic Procedure with Cancel Code. > |
| 65 | Cruise control command switch malfunction is detected. (When the switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected.) | < Refer to 65 , Diagnostic Procedure with Cancel Code. > |
| 66 | Cruise control calculation (microcomputer) malfunction is detected. | < Refer to 66 , Diagnostic Procedure with Cancel Code. > |