Auto Headlight Beam Leveler Control Module: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel lower cover and knee airbag module. < Ref. to REMOVAL , Knee Airbag Module. >
Release the lock and remove the fuse holder.

Fig 1: Locating Auto Headlight Beam Leveler Control Module
Courtesy of SUBARU OF AMERICA, INC.
Remove the relay & fuse box.
1. Disconnect the connector.
2. Remove the bolts and nuts, and remove the relay & fuse box.
  
  Fig 2: Removing Relay And Fuse Box
  Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector of body integrated unit.

Fig 3: Locating Body Integrated Unit Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the Auto Headlight Beam Leveler Control Module.
1. Disconnect the connector.
2. Release the claws and pull out the Auto Headlight Beam Leveler Control Module.
  
  Fig 4: Removing Auto Headlight Beam Leveler Control Module
  Courtesy of SUBARU OF AMERICA, INC.