Light Control Sensor: Removal

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the sensor - automatic light.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
1. Release the connector and claws, and remove the panel COMPL - instrument UPR.
  
  Fig 1: Removing Instrument UPR Panel COMPL
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws, and remove the sensor - automatic light from the panel COMPL - instrument UPR.
  
  Fig 2: Removing Automatic Light Sensor From Panel COMPL
  Courtesy of SUBARU OF AMERICA, INC.