LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Outback 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Occupant Detection System (Diagnostics) >> Control Module I/O Signal >> Electrical Specification
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Electrical Specification

CAUTION: Never remove the occupant detection control module, occupant detection sensor or seat frame, because they are integrated into one unit.
Fig 1: Control Module I/O Signal Terminal Layout
G06653299Courtesy of SUBARU OF AMERICA, INC.
Terminal name Terminal No. Input/output value Remarks
IG - power supply 5 9 - 16 V When ignition switch is ON
Airbag control module communication (COM) 3 Open collector terminal Communication line
Airbag control module communication (GND) 4 0 V Ground
Buckle switch 9 0 - IG voltage Ignition voltage when switch is ON
Buckle switch (GND) 8 0 V Switch ground
scientia non olet · About LEMON Manuals