LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> Outback 3.6R Limited >> Repair and Diagnosis >> Transmission >> Manual Trans >> Transmission Control Systems >> Select Lever >> Disassembly >> At Select Lever Assembly
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

At Select Lever Assembly

  1. Remove the spacer plate.
    Fig 1: Identifying AT Select Lever Assembly Spacer Plate
    G06651725Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the gasket.
    Fig 2: Identifying AT Select Lever Assembly Gasket
    G06651726Courtesy of SUBARU OF AMERICA, INC.
  3. Insert a flat tip screwdriver with a thin tip under the connector and disconnect the harness connector from the plate COMPL.
    Fig 3: Locating Plate COMPL Harness Connector
    G06651727Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the harness from the plate COMPL.
    Fig 4: Identifying Plate COMPL Harness
    G06651728Courtesy of SUBARU OF AMERICA, INC.
  5. Raise the claw with a flat tip screwdriver with a thin tip and remove the solenoid unit.
    Fig 5: Removing Solenoid Unit Using Flat Tip Screwdriver
    G06651729Courtesy of SUBARU OF AMERICA, INC.
  6. Using a flat tip screwdriver with a thin tip, remove the solenoid unit terminals from the connector.
    Fig 6: Removing Solenoid Unit Terminals From Connector Using Flat Tip Screwdriver
    G08578408Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the clamp push nut.
    NOTE: Replace the clamp push nut with a new part.
    Fig 7: Locating Select Lever Clamp Push Nut
    G06651731Courtesy of SUBARU OF AMERICA, INC.
  8. Pull out shaft control.
    Fig 8: Pulling Out Shaft Control
    G06651732Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the clamp push nut.
    NOTE: Replace the clamp push nut with a new part.
    Fig 9: Locating Select Lever Clamp Push Nut
    G06651733Courtesy of SUBARU OF AMERICA, INC.
  10. Pull out spacer pin guide.
    Fig 10: Pulling Out Spacer Pin Guide
    G06651734Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the clamp pin.
    Fig 11: Removing Clamp Pin
    G06651735Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the spacer pin guide.
    Fig 12: Removing Spacer Pin Guide
    G06651736Courtesy of SUBARU OF AMERICA, INC.
  13. Remove the select lever COMPL from the plate COMPL.
    Fig 13: Removing Select Lever COMPL From Plate COMPL
    G06651737Courtesy of SUBARU OF AMERICA, INC.
  14. Remove the arm assembly.
    Fig 14: Removing Arm Assembly
    G08578416Courtesy of SUBARU OF AMERICA, INC.
  15. Remove the plate guide from the select lever COMPL.
    Fig 15: Removing Plate Guide From Select Lever COMPL
    G06651739Courtesy of SUBARU OF AMERICA, INC.
  16. Remove the rod detent and detent spring from the select lever COMPL.
    Fig 16: Identifying Rod Detent And Detent Spring
    G07913122Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals