LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Entry Start System Start System (Keyless Start) >> Entry & Start System (Start Function) >> The Engine Does Not Start >> Circuit description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit description

With the electrical key transmitter sub-assembly in the vehicle interior, press the engine switch. The collation ECM (smart key ECM assembly) receives the signal and the power mode changes. With the shift lever in P *1 or N *1, if you depress the brake pedal *1 or the clutch pedal *2 and press the engine switch, you can start the engine.

*1: With automatic transmission

*2: With manual transmission

NOTE:
  • Only if the steering lock is unlocked, even if the shift lever is in the N position, you can start the engine. *
  • In IG ON, if the shift lever is in a position other than P, if you press the engine switch, the power changes to ACC ON. After that, if you move the shift lever to P and press the engine switch while depressing the brake pedal, the power changes to IG OFF. *
  • If you remove and then reconnect the battery cable, the power returns to the mode it was before you removed the cable.

*: for automatic transmission

Related [Current Data Display & Save] and [System Operation Check Mode] items

DIAGNOSTIC CODES DESCRIPTION

Diagnostic codes [Current Data Display & Save] items [System Operation Check Mode] items
[The engine does not start.] Power supply
  • [Stop Light Switch 1*1]
  • [Steering unlock SW]
  • [Shift P signal*1]
  • [Neutral SW/Clutch SW]
  • [IG2 relay monitor (outside)]
  • [IG2 relay monitor (inside)]
  • [ACC relay monitor]
  • [IG1 relay monitor (outside)]
  • [IG1 relay monitor (inside)]
  • [Starter request signal monitor]
  • [Power supply status]

Collation
  • [Engine start permission request reception status]
  • [L Code Check]

Engine
  • [Starter Switch]
  • [Shift SW Status (P Range)*1]
  • [Shift SW Status (N Range)*1]
  • [Ignition]
-