Inspection steps
Go to troubleshooting for CAN communication system. (refer to HOW TO TROUBLESHOOT )
NOTE:
- Read the freeze frame data using the SSM3. A part of engine running conditions under which the engine trouble occurred is recorded in the freeze frame data, which is useful for trouble shooting.
- When CAN communication system error occurs, the engine control computer cannot receive the updated information from each controller. Therefore, check of the freeze frame data corresponding to the DTCs related to the controllers is no longer useful for troubleshooting.
- When the diagnostic codes for CAN communication error and the corresponding sensor error are both output simultaneously, the CAN communication error must be restored before troubleshooting the error codes for the sensors.
- Read DTC
- Connect the SSM3 to the DLC3.
- Turn the ignition switch to ON.
- Turn on the SSM3.
- Follow the SSM3 on-screen instructions to check the DTC. (Refer to CHECKING/CLEARING DTC
)
Result Go to U0073, U0101, U0122, U0155, U0402, U0416, or U0423 is output. A Either U0073, U0101, U0122, U0155, U0402, U0416, or U0423, and other DTCs are output. B B: To corresponding DTC chart (refer to DTC TABLE )
A: CAN communication system (refer to HOW TO TROUBLESHOOT )