October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Unit Inspection

Inspection of intake air flow meter sub-assembly

Use a working lamp, visually check the platinum filament (heater) portion of the intake air flow meter sub-assembly for foreign matter.

Fig 1: Checking Platinum Filament (Heater) Portion Of Intake Air Flow Meter Sub-Assembly
Courtesy of SUBARU OF AMERICA, INC.

Criteria: No foreign matter

NOTE: If there is a foreign matter on the platinum filament (heater), replace the intake air flow meter sub-assembly.

Inspection of intake temperature sensor resistance

Measure the resistance between the terminals.

Resistance

Inspection terminals	Inspection conditions	Standard value
1 - 2	-20°C {-4°F}	13.6 to 18.4 kΩ
	20°C {68°F}	2.21 to 2.69 kΩ
	60°C {140°F}	0.49 to 0.67 kΩ

Fig 2: Intake Air Flow Meter Sub-Assembly Connector Terminal Identification

G10213030

Courtesy of SUBARU OF AMERICA, INC.