Engine Control Module (ECM): Installation

Install in the reverse order of removal.

CAUTION:

When the ECM of model with immobilizer has been replaced, be sure to perform the registration of immobilizer system. (Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".)
When the ECM has been replaced, be sure to perform the registration of VIN. Refer to OPERATION .

NOTE: When replacing the ECM, be careful not to use the ECM of wrong specification to avoid any damage on the fuel injection system.

Tightening torque:

33 N.m (3.4 kgf-m, 24.3 ft-lb)

Fig 1: Locating ECM Mounting Bolts

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

Fig 2: Locating ECM Mounting Bolts (1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating ECM Mounting Bolts (2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.