September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Front Regulator and Motor Assembly: Inspection
- Disconnect the connector of the motor - front.
- Check the motor operation when battery voltage is applied between terminals of the motor - front connector.
Courtesy of SUBARU OF AMERICA, INC.
- LH side
| Terminal No. |
Inspection conditions |
Standard |
| 4 (+) - 1 (-) |
Apply battery voltage between terminals. |
Increase |
| 1 (+) - 4 (-) |
Apply battery voltage between terminals. |
Decrease |
- RH side
| Terminal No. |
Inspection conditions |
Standard |
| 3 (+) - 6 (-) |
Apply battery voltage between terminals. |
Increase |
| 6 (+) - 3 (-) |
Apply battery voltage between terminals. |
Decrease |
- If it does not operate properly as a result of inspection, replace the regulator and motor assembly - front.