Enable Conditions
ENABLE CONDITIONS
| Secondary Parameters | Enable Conditions |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Sub feedback | In operation |
| Amount of intake air | ≥ 10 g/s (0.35 oz/s) |
| Estimated temperature of the rear oxygen sensor element | ≥ 500 °C (932 °F) |
| Enable conditions at interrupt control are as follows | |
| Air fuel ratio reduced from target air fuel ratio | = Value of Map |
| Continuous time when rear oxygen sensor output voltage is less than 0.55 V | ≥ 5000 ms |
VOLTAGE REFERENCE
| Output voltage of rear oxygen sensor V | 0.000 | 0.150 | 0.200 | 0.400 | 0.600 |
| Air fuel ratio reduced from target air fuel ratio % | -0.15 | -0.15 | -0.04 | -0.04 | -0.04 |