LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> Outback 2.5i >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DO) >> Camshaft Position Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Camshaft Position Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the air intake duct. (RH side only) <Ref. to REMOVAL , Air Intake Duct.>
  3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.
    • RH side
      Fig 1: Locating Camshaft Position Sensor Connector - RH Side
      G10262164Courtesy of SUBARU OF AMERICA, INC.
    • LH side
      Fig 2: Locating Camshaft Position Sensor Connector - LH Side
      G10262165Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals