Inspection Mode 7
WARNING: This page is about a different car, the 2016 Subaru Outback and 2016 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B1401 | METER COLLATION | Model without keyless access with push button start system/model without immobilizer control module |
| B1402 | IMMOBILIZER KEY COLLATION | Model without keyless access with push button start system/model without immobilizer control module |
| B1407 | MET COMMUNICATION | Model without keyless access with push button start system/model without immobilizer control module |
| B1408 | METER NON-VOLATILE MEMORY | Model without keyless access with push button start system/model without immobilizer control module |
| B1410 | TRANSPONDER COMMUNICATION | Model without keyless access with push button start system/model without immobilizer control module |
| B1411 | IMMOBILIZER ANTENNA | - |
| U0073 | CAN FAILURE, BUS 'OFF' DETECTION | - |
| U0074 | CONTROL MODULE COMMUNICATION BUS "BODY-CAN" OFF | - |
| U0100 | LOST COMMUNICATION WITH ECM/PCM "A" | - |
| U0122 | LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULE | - |
| U0128 | LOST COMMUNICATION WITH PARK BRAKE CONTROL MODULE | - |
| U0131 | LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE | - |
| U0151 | LOST COMMUNICATION WITH RESTRAINTS CONTROL MODULE | - |
| U0155 | LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE | - |
| U0167 | LOST COMMUNICATION WITH IMMOBILIZER CONTROL MODULE | Model without keyless access with push button start system/model without immobilizer control module |
| U0327 | SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULE | Model with keyless access with push button start system |
| U0401 | INVALID DATA RECEIVED FROM ECM/PCM "A" | - |
| U0416 | INVALID DATA RECEIVED FROM VEHICLE DYNAMICS CONTROL MODULE | - |
| U0423 | INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE | - |
| U0426 | INVALID DATA RECEIVED FROM IMMOBILIZER CONTROL MODULE | Model without keyless access with push button start system/model without immobilizer control module |
| U0427 | INVALID DATA RECEIVED FROM VEHICLE SECURITY CONTROL MODULE | Model with keyless access with push button start system |
| U1673 | LIN COMMUNICATION BUS ERROR BODY CONTROL MODULE | Depends on the customize setting |
| U0101 | LOST COMMUNICATION WITH TCM | Depends on the customize setting |
| U0164 | LOST COMMUNICATION WITH HVAC CONTROL MODULE | Depends on the customize setting |
| U0169 | LOST COMMUNICATION WITH SUNROOF CONTROL MODULE | Depends on the customize setting |
| U0208 | LOST COMMUNICATION WITH SEAT MEMORY | Depends on the customize setting |
| U0230 | LOST COMMUNICATION WITH POWER REAR GATE CONTROL MODULE | Depends on the customize setting |
| U0402 | INVALID DATA RECEIVED FROM TCM | Depends on the customize setting |
| U0424 | INVALID DATA RECEIVED FROM HVAC CONTROL MODULE | Depends on the customize setting |
| U123C | LOST COMMUNICATION WITH HIGH BEAM ASSIST CONTROL MODULE | Depends on the customize setting |
| U153D | INVALID DATA RECEIVED FROM HIGH BEAM ASSIST CONTROL MODULE | Depends on the customize setting |
Diagnostic procedure:
- Perform the Clear Memory Mode. < Ref. to CLEAR MEMORY MODE . >
- Read the DTC and check that the DTC is not displayed. < Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) . >NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC. After solving the DTC, repeat from step 1).
- Turn the ignition switch OFF → ON, and wait for 10 seconds or more.
- Read the DTC and check that the DTC is not displayed. < Ref. to
READ DIAGNOSTIC TROUBLE CODE (DTC) . >NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.