Keyless Access Control Module: Installation
CAUTION:
- Registration of the immobilizer is necessary when a immobilizer-related control module has been replaced. For detailed operation procedure, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
- Before handling the airbag module, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". <Ref. to CAUTION , General Description.>
NOTE:
Make sure that there are no differences from the contents of the current settings after installation. <Ref. to
LIST
, Read Current Data.>
- Install the keyless access control module.
- Install the relay & fuse box and fuse holder.
Tightening torque:
Relay & fuse box: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the cover assembly - instrument panel LWR driver and the knee airbag module.
- Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
NOTE:
For models other than STI model, connect the ground terminal to battery sensor.