Read Current Data: Operation
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.
- On «Main Menu» display, select «Each System Check».
- On «System Selection Menu» display, select «Airbag System».
- On «Airbag System» display, select «Current Data Display & Save».
| Item | Display | Note |
|---|---|---|
| Trip Count | - | <Ref. to TIME STAMP , CAUTION, General Description.> |
| Count | - | |
| Time Count | - | |
| Belt Buckle Switch LH | Unbelted/Belted/Other | "Belted" when the left side seat belt is fastened "Unbelted" when the left side seat belt is not fastened "Other" in other cases |
| Belt Buckle Switch RH | Unbelted/Belted/Other | "Belted" when the right side seat belt is fastened "Unbelted" when the right side seat belt is not fastened "Other" in other cases |
| Passenger Occupant Status | Occupied/Adult/Child/Empty or CRS | "Occupied" when the occupant is present "Adult" "Child" "Empty or CRS" when the seat is unoccupied or when child restraint seat is installed
CAUTION:
When checking the operating status, be careful of the followings.
|
| Passenger Airbag Status | ON/OFF | "ON" when the passenger occupant status is "Occupied" "OFF" when the status is "Empty or CRS" |
| Data record No. | Not assign/1 | Displays "1" when any EDR data is recorded. |
| Data record No. | Not assign/1 | Displays "1" when any EDR data is recorded. |
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".