Data Link Connector: Note
WARNING: This page is about a different car, the 2015 Subaru Outback and 2015 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
This connector is used for Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.
| Terminal No. | Contents |
|---|---|
| 1 | Blank |
| 2 | Blank |
| 3 | Blank |
| 4 | Ground |
| 5 | Ground |
| 6 | CAN communication (Hi) |
| 7 | Subaru Select Monitor signal |
| 8 | Blank |
| 9 | Blank |
| 10 | Blank |
| 11 | Blank |
| 12 | Blank |
| 13 | Blank |
| 14 | CAN communication (Lo) |
| 15 | Blank |
| 16 | Power supply |