Electronic Throttle Control Relay: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery.
Remove the instrument panel lower cover. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
Remove the bolts and nuts securing the fuse block and move down the fuse block.

Fig 1: Locating Fuse Block Bolts And Nuts
Courtesy of SUBARU OF AMERICA, INC.
Remove the electronic throttle control relay from the relay block.

Fig 2: Locating Electronic Throttle Control Relay From Relay Block

Courtesy of SUBARU OF AMERICA, INC.