LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection System (STI)) >> Mass Air Flow and Intake Air Temperature Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Mass Air Flow and Intake Air Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the mass air flow and intake air temperature sensor.
Fig 1: Locating Mass Air Flow And Intake Air Temperature Sensor Bolts
G10264826Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals