LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2015 >> WRX STI >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control Systems >> MT Gear Shift Lever >> Installation >> Except For STI Model
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Except For STI Model

  1. Install the gear shift lever assembly.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb) 

    Fig 1: Locating Gear Shift Lever Assembly Screws
    G09481214Courtesy of SUBARU OF AMERICA, INC.
  2. Install the harness clamp.
  3. Lift up the vehicle.
  4. Install the cable cover assembly.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  5. Connect the MT gear shift cable and MT gear select cable.
    CAUTION: Be careful not to deform the cable inner.
    Fig 2: Identifying MT Gear Shift Cable And MT Gear Select Cable
    G10267871Courtesy of SUBARU OF AMERICA, INC.
  6. Attach the cable cover plate.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  7. Install the center exhaust cover.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb) 

  8. Install the center exhaust pipe (rear). <Ref. to INSTALLATION , Center Exhaust Pipe.>
  9. Lower the vehicle.
  10. Adjust the detent of the MT gear shift lever. <Ref. to ADJUSTMENT , MT Gear Shift Lever.>
  11. Install the panel center LWR LH and RH. <Ref. to INSTALLATION , Console Box.>
  12. Install the cover - shift lever, and install the gear shift knob. <Ref. to INSTALLATION , Console Box.>
  13. Install the console box assembly. <Ref. to INSTALLATION , Console Box.>
  14. Make sure the gears can be shifted accurately into each gear. Adjust the MT gear select lever, if the gears cannot be shifted correctly. <Ref. to ADJUSTMENT , MT Gear Select Cable.>
  15. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Note.>
scientia non olet · About LEMON Manuals