LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Premium >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Wireless Door Lock Control System (Service Information) >> Trunk Panel Lock Assembly >> Unit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Unit Inspection

  1. Inspection of trunk lock assembly
    1. Operation check of trunk lock assembly
      1. Set the latch of the trunk lock assembly to the lock position.
      2. Check the motor operation when battery voltage is applied between the terminals of the connector.

        Criteria

        DOOR LOCK OPERATION DESCRIPTION (CRITERIA)

        Battery connection Door lock operation
        Battery positive →1 (B)
        Battery ground →2 (E)        		 Lock →Open
    2. Inspection of trunk lock assembly courtesy switch
      1. Measure the resistance between the terminals.

        Resistance

        RESISTANCE REFERENCE

        Inspection terminals Inspection conditions Standard value
        Tester positive →2(E)
        Tester negative →3(D+)        		 Locked 10 kΩ or more
        Open Less than 1 Ω
        Fig 1: Trunk Lock Assembly Courtesy Switch Connector Terminal Identification
        G10216188Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals