LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> BRZ Series.HyperBlue >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Wireless Door Lock Control System (W/ Entry Start) >> Wireless Door Lock Control System (With Entry & Start System) >> Current Data Display & Save/System Operation Check Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Current Data Display & Save/System Operation Check Mode

  1. Read data list
    CAUTION: The values indicated under the normal conditions in the table below are informative values. Do not depend on reference value only when judging if the part is faulty.
    NOTE: By reading [Current Data Display & Save] on SSM3, you can check the values and status of switches, sensors, actuators and other items without removing any parts. This inspection is very useful because it allows an operator to read any intermittent conditions or signals without disturbing parts or wiring. By reading the current data display & save information at an initial phase of troubleshooting, you can save time for diagnosis.
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch (IG) to ON.
    3. Turn on the SSM3.
    4. Enter the following menus: [Integ. unit mode] →[Current Data Display & Save] or [Keyless access system] →[Collation ECM] →[Current Data Display & Save].
    5. Based on the display contents of SSM3, read the current data display & save.

      Main body

      MAIN BODY ITEM DESCRIPTION

      Item Name Description/display range Normal value Remarks
      [D Door Courtesy] Driver's door courtesy light switch signal/ON or OFF ON: Driver's door is open.
      OFF: Driver's door is closed      		 -
      [D Door Lock Pos] Driver's door unlock detection switch signal/Lock or Unlock [Lock]: The driver's door is locked.
      [Unlock]: The driver's door is unlocked.      		 -
      [P Door Courtesy] Passenger's door courtesy light switch signal/ON or OFF ON: The passenger's door is open.
      OFF: The passenger's door is closed.      		 -
      [P Door Lock Pos] Passenger's door unlock detection switch signal/Lock or Unlock [Lock]: The passenger's door is locked.
      [Unlock]: The passenger's door is unlocked.      		 -
      [Luggage Courtesy SW] Trunk courtesy switch signal/OFF or ON OFF: The trunk is closed.
      ON: Trunk is open      		 -
      [Ignition] Engine switch IG signal/ON or OFF ON: Engine switch is ON (IG)
      OFF: Engine switch OFF      		 -
      [ACC SW] Engine switch ACC signal/ON or OFF ON: The engine switch is on (ACC).
      OFF: Engine switch OFF      		 -
      [Incorrect ROL code] Status of different rolling code/NO or YES No: Key rolling code matches vehicle
      Yes: Key rolling code does not match vehicle      		 -
      [Incorrect ID code] Status of different ID code/NO or YES No: Key ID code matches vehicle
      Yes: Key ID code does not match vehicle      		 -
  2. Perform system operation check mode
    NOTE: By performing active tests with SSM3, you can operate relays, VSV, actuators and other devices without removing any parts. This functional inspection method is very useful because it helps check state-related signals and identify the faulty part without removing any parts and wiring. By performing active tests at an initial phase of troubleshooting, you can save time for diagnosis. The current data display & save information can be displayed during system operation check mode.
    1. Connect the SSM3 to the DLC3.
    2. Turn the engine switch (IG) to ON.
    3. Turn on the SSM3.
    4. Enter the following menu items: [Integ. unit mode] →[Work Support] →[System Operation Check Mode].
    5. Based on the SSM3 display contents, perform active tests.

      Main body

      MAIN BODY ITEM DESCRIPTION

      Item Name Tested parts Control range Remarks
      [Door Lock] Operate door lock motor [Lock]/[Unlock] Unlock/Lock -
      [Trunk and Back-Door Open] Trunk lock motor OFF/ON -
      [Wireless Buzzer] Wireless door lock buzzer OFF/ON -
scientia non olet · About LEMON Manuals