Function Check: Operation

WARNING: This page is about a different car, the 2016 Subaru Impreza and 2016 Subaru Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

On «Start» display, select «Diagnosis».
On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
On «Main Menu» display, select «Each System».
On «Select System» display, select «Body Control» and then select «Enter».
On «Select Function» display, select «Active Test».
NOTE:
- If not equipped (depending on destination area or vehicle equipment condition), process will not go on.
- The operation is disabled for the models with keyless access with push button start system because the key lock solenoid is not installed.
- For detailed operation procedures, refer to "Application help".