LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Outback 2.5i Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics) >> Inspection Mode >> Procedure >> Inspection Mode 6
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Inspection Mode 6

DTC Item Note
B2284 BRAKE SIGNAL CORRELATION -

Diagnostic procedure:

  1. Prepare for the inspection mode. < Ref. to PREPARATION FOR THE INSPECTION MODE , PROCEDURE, Inspection Mode. >
  2. Turn the ignition switch to ON, depress and hold the brake pedal for 20 seconds of more, then release the brake pedal and wait for 20 seconds and more.
  3. Read the DTC and check that the DTC is not displayed. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . >
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis according to DTC.
scientia non olet · About LEMON Manuals