Keyless Access Control Module: Removal

Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
Remove the combination meter assembly. < Ref. to REMOVAL , Combination Meter. >
Remove the keyless access control module.
1. Remove the reinforcement - combination meter.
  NOTE: For model with navigation and model with telematics, remove the GPS antenna assembly. < Ref. to REMOVAL , GPS Antenna. >
2. Disconnect the connector and remove the bolt.
  
  Fig 1: Locating Keyless Access Control Module Bolts
  Courtesy of SUBARU OF AMERICA, INC.