Keyless Access Control Module: Installation
NOTE:
Make sure that there are no differences from the contents of the current settings after installation. < Ref. to
LIST
, Read Current Data. >
- Install the reinforcement - combination meter and keyless access control module.NOTE: For model with navigation, install the GPS antenna assembly. < Ref. to INSTALLATION , GPS Antenna. >
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the combination meter assembly. < Ref. to INSTALLATION , Combination Meter. >
- Connect the ground terminal to battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >