Starting System & Charging System (H4DO): General Description: Specification
| Item | Specifications | |||
|---|---|---|---|---|
| Vehicle model | CVT | MT | ||
| Starter | Type | Reduction type | ||
| Model | M000T38571ZC | M000T33176ZC | ||
| Manufacturer | Mitsubishi Electric | |||
| Voltage and output | 12 V - 1.2 kW | 12 V - 1.0 kW | ||
| Direction of rotation | Counterclockwise (when observed from pinion) | |||
| Number of pinion teeth | 9 | 8 | ||
| Armature commutator runout | Standard | 0.05 mm (0.0020 in) | ||
| Limit | 0.10 mm (0.0039 in) | |||
| Armature depth of segment mold | Standard | 0.5 mm (0.020 in) | ||
| Brush length | Standard | 12.3 mm (0.484 in) | ||
| Limit | 7.0 mm (0.276 in) | |||
| Brush spring force | Standard | 15.9 - 19.5 N (1.62 - 1.99 kgf, 3.57 - 4.38 lbf) | ||
| Limit | 2.5 N (0.25 kgf, 0.56 lbf) | |||
| No-load characteristics | Voltage | 11 V | ||
| Current | 90 A or less | 95 A or less | ||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, with load response control system | ||
| Model | A2TX3382AC | |||
| Manufacturer | Mitsubishi Electric | |||
| Voltage and output | 12 V - 130 A | |||
| Polarity on ground side | Negative | |||
| Direction of rotation | Clockwise (when observed from pulley side) | |||
| Stator connection | 3-phase delta type | |||
| Output current | 1, 500 r/min - 50 A or more 2, 500 r/min - 111 A or more 5, 000 r/min - 133 A or more |
|||
| Regulated voltage | 14.1 - 14.8 V [20°C (68°F)] | |||
| Rotor slip ring outer diameter | Standard | 22.7 mm (0.894 in) | ||
| Limit | 22.1 mm (0.870 in) | |||
| Brush length | Standard | 22.5 mm (0.886 in) | ||
| Limit | 5.0 mm (0.197 in) | |||
| Battery | Type and capacity | 12 V - 48 AH (55D23R) | ||
| CCA | 356 A | |||