DTC P1C00 Battery Monitor Module "A" Performance: DTC Detecting Condition
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode < Ref. to
OPERATION
, Clear Memory Mode. >, and Inspection Mode < Ref. to
PROCEDURE
, Inspection Mode. >.
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. Check for DTC. < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) . > |
Is P1C00 displayed in «Present fault»? | Replace the battery sensor. < Ref. to BATTERY SENSOR . > | Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again. |