LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Forester 2.0XT Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transaxle (Diagnostics) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Preparation For Drive Cycle

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and clearing memory, check that no DTC remains. Ref. to TRANSMISSION (DIAGNOSTICS)>Clear memory .
NOTE: Perform the drive cycle after warming up the engine except when the ATF temperature at engine start is specified.
scientia non olet · About LEMON Manuals