Push Button Start System

Ignition/ACC change function check 

1. Check push button ignition switch function
   1. Check the change control through push button ignition switch, brake pedal operation, and shift position.
      • CVT model

        Shift lever position	Brake pedal operation	Push button ignition switch operation
        P	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → Ignition switch OFF
        P	Released	Engine running → Ignition switch OFF
        P	Depressed	Ignition switch OFF → Engine started
        P	Depressed	ACC ON → Engine started
        P	Depressed	Ignition switch ON → Engine started
        P	Depressed	Engine running → Ignition switch OFF
        N	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → ACC ON
        N	Released	Engine running → ACC ON
        N	Depressed	Ignition switch OFF → Engine started
        N	Depressed	ACC ON → Engine started
        N	Depressed	Ignition switch ON → Engine started
        N	Depressed	Engine running → ACC ON
        Other than P or N	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → ACC ON
        Other than P or N	Released	Engine running → ACC ON
        Other than P or N	Depressed	Ignition switch OFF → Ignition switch ON
        Other than P or N	Depressed	ACC ON → Ignition switch ON
        Other than P or N	Depressed	Engine running → ACC ON

      • MT model

      Shift lever position	Clutch pedal operation	Push button ignition switch operation
      -	Released	Repeat Ignition switch OFF → ACC ON → Ignition switch ON → Ignition switch OFF
      	Released	Engine running → Ignition switch OFF
      	Depressed	Ignition switch OFF → Engine started
      	Depressed	ACC ON → Engine started
      	Depressed	Ignition switch ON → Engine started
      	Depressed	Engine running → Ignition switch OFF

   2. Check the changeover functions other than push button ignition switch operation.

      With ACC ON or the ignition switch ON, and the shift lever in "P" position, check that ACC is ON or Ignition switch is ON → Ignition switch is OFF when the vehicle is left for 1 hour or more.

   3. If the inspection result indicates an improper operation, check the push button start system. <Ref. to POWER SUPPLY SWITCHING SYSTEM , INSPECTION, General Diagnostic Table.>
2. Check power status display

1. Check the power indicator display of the push button ignition switch.

   Indicator display

   Push button ignition switch status	Indicator lighting status
   Ignition switch OFF (except for condition (1))	Light OFF
   ACC ON (except for condition (1))	Orange light
   Ignition switch ON (except for condition (1))	Orange light
   Engine start standby ((1))	Green light
   After engine is started	Light OFF
   NOTE: (1) Key collation is normal, and the stop light switch (AT) is ON.

2. If the inspection result indicates an improper operation, check the push button start system. <Ref. to POWER SUPPLY SWITCHING SYSTEM , INSPECTION, General Diagnostic Table.>