April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1576: EGI Control Module EEPROM

DTC detecting condition:

ECM malfunctioning
When the ROM in ECM was inaccessible during registration.

Trouble symptom:

Engine will not start.

CAUTION: For replacement procedure of ECM, refer to "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.

Step	Check	Yes	No
1 PERFORM ECM REGISTRATION. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.	Is ECM registration complete?	Make sure that the engine can start. This completes the work.	Go to step 2
2 PERFORM ECM REGISTRATION. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.	Is ECM registration complete?	Make sure that the engine can start. This completes the work.	Go to step 3
3 PERFORM ECM REGISTRATION. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.	Is ECM registration complete?	Make sure that the engine can start. This completes the work.	Replace the ECM. Ref. to REMOVAL , Engine Control Module (ECM). Ref. to REMOVAL , Engine Control Module (ECM).