LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Access Control Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Keyless Access Control Module: Installation

CAUTION: When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type D" described in "REGISTRATION SERVICE INFORMATION FOR IMMOBILIZER".
  1. Install the reinforcement - combination meter and keyless access Control Module.
    NOTE: For model with navigation, install the GPS antenna assembly. <Ref. to INSTALLATION , GPS Antenna.>

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Install the combination meter assembly. <Ref. to INSTALLATION , Combination Meter.>
  3. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
scientia non olet · About LEMON Manuals