LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Entertainment System) >> Data Communication Module >> Installation >> Data Communication Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Communication Module

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the data communication module and connect the cable CCM connector.
    CAUTION:

    Never install a data communication module from another vehicle. It may disable recognition of vehicle information and cause communication error. 

  2. Install the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION 
  3. Install the panel assembly center and the ornament panel mid passenger. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>INSTALLATION
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  5. Perform the registration if the data communication module is replaced with a new part. Ref. to ENTERTAINMENT & MONITORING>TELEMATICS SYSTEM>OPERATION 
  6. Check the LED illumination status of the telematics button. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW>CHECK>LED ILLUMINATION STATUS LIST
scientia non olet · About LEMON Manuals