DTC B1576 EGI Control Module EEPROM
DTC DETECTING CONDITION:
- ECM malfunctioning
- When the ROM in ECM was inaccessible during registration.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM ECM REGISTRATION. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. |
Is ECM registration complete? | Make sure that the engine can start. This completes the work. | Go to step 2 . |
| 2 PERFORM ECM REGISTRATION. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. |
Is ECM registration complete? | Make sure that the engine can start. This completes the work. | Go to step 3 . |
| 3 PERFORM ECM REGISTRATION. Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. |
Is ECM registration complete? | Make sure that the engine can start. This completes the work. | Replace the ECM. <Ref. to REMOVAL , Engine Control Module (ECM).> <Ref. to REMOVAL , Engine Control Module (ECM).> |