DTC C2548 Vehicle Dynamics Control Module System
DTC DETECTING CONDITION:
When error flag from VDCCM is detected for 2 seconds after the ignition switch is ON.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. Read the DTC of VDC system using the Subaru Select Monitor. |
Is a DTC related to VDC system (sensors) detected? | Perform the diagnosis according to the DTC. <Ref. to List of Diagnostic Trouble Code (DTC) .> | Go to step 2 . |
| 2 CHECK DTC. Using the Subaru Select Monitor, read all DTCs. |
Is a DTC related to CAN communication detected? | Perform the diagnosis according to the DTC. <Ref. to List of Diagnostic Trouble Code (DTC) .> | Replace the power steering control module. <Ref. to Power Steering Control Module .> |