Mode E (Measurement Of Reference Pressure For Judgment)
Judgment 1
Purpose: Judge the reference pressure stability.
Judge as NG when the following conditions are established.
Judgment 2
Purpose: Judge whether the reference pressure is within the normal range, and detect the vacuum pump and orifice malfunctions. Judge the vacuum pump performance stability.
Judge as NG when the following conditions are established.
Judgment 3
Purpose: Judge the presence of evaporative emission system leak.
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | DTC |
|---|---|---|
| Judgment 1 | ||
| |Pressure sensor maximum output value - Pressure sensor minimum output value| | More than 314Pa (2.355mmHg, 0.1inHg) | P2404 |
| or | ||
| Judgment 2 | ||
| Reference pressure for judgment | Less than value of Map5 | P2404 |
| or | ||
| More than value of Map6 | ||
| or | ||
| Judgment 3 | ||
| |Reference pressure for setting the target negative pressure - Reference pressure for judgment| | More than 0.9kPa (7.058mmHg, 0.3inHg) | P2404 |
MAP 5 SPECIFICATION
| Barometric pressure (kPa (mmHg, inHg)) | 70 (525, 20.7) | 80 (600, 23.6) | 90 (675, 26.6) | 100 (750, 29.5) |
|---|---|---|---|---|
| Reference pressure for judgment (kPa (mmHg, inHg)) | -4.5 (-34.02, -1.3) | -4.6 (-34.815, -1.4) | -4.7 (-35.618, -1.4) | -4.9 (-36.42, -1.4) |
MAP 6 SPECIFICATION
| Barometric pressure (kPa (mmHg, inHg)) | 70 (525, 20.7) | 80 (600, 23.6) | 90 (675, 26.6) | 100 (750, 29.5) |
|---|---|---|---|---|
| Reference pressure for judgment (kPa (mmHg, inHg)) | -0.9 (-6.18, -0.2) | -0.9 (-6.983, -0.3) | -1 (-7.785, -0.3) | -1.1 (-8.58, -0.3) |
Time needed for diagnosis: 23 min
Confirm the malfunction at next engine start.
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.