LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Forester 2.5i, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) (H4DO) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For Drive Cycle

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3-10.6 US gal, 4.4-8.8 Imp gal)].
  2. After performing the diagnostics and clearing memory, check that no DTC remains. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Clear Memory Mode .
NOTE: Perform the drive cycle after warming up the engine except when the engine coolant temperature at engine start is specified.
scientia non olet · About LEMON Manuals