September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Check The Mass Air Flow Sensor Unit
- Remove the mass air flow and intake air temperature sensor. Ref. to REMOVAL .
NOTE:
Do not disconnect the connector.
- Turn the ignition switch to ON. (Engine OFF)
- Using the Subaru Select Monitor, read the intake air amount. Ref. to LIST
.
- Check the voltage changes when air is blown to the mass air flow sensor unit in arrow direction.
CAUTION:
Be careful that no dust enter inside the unit when air is blown.
Courtesy of SUBARU OF AMERICA, INC.
- After inspection, install the related parts in the reverse order of removal.