LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> ABS Sequence Control >> Operation >> Abs Sequence Control With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Sequence Control With SUBARU Select Monitor

NOTE: In the event of any trouble, the ABS sequence control will not operate.
  1. Connect the Subaru Select Monitor to data link connector.
    NOTE: For detailed operation procedures, refer to "Application help".
    1. Turn the ignition switch to ON.
    2. On <<Start>> display, select <<Diagnosis>>.
    3. On <<Vehicle selection>> display, input the target vehicle information and select <<Confirmed>>.
    4. On <<Main Menu>> display, select <<Each System>>.
    5. On <<Select System>> display, select <<Brake Control System>> and select <<Enter>>.
    6. On <<Select Function>> display, select <<Work Support>>.
    7. From the work support item list, select <<ABS Sequence Control Mode>>.
  2. Follow the procedures displayed in the Subaru Select Monitor to execute the following.
    1. When using a brake tester, depress the brake pedal with a force of 100 N (10.2 kgf, 22.5 lbf).
    2. When using a pressure gauge, press the brake pedal so that the pressure gauge indicates 3, 500 kPa (36 kgf/cm2 , 511 psi).
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals