VDC Control Module Parameter Writing

Perform writing of parameter.
1. Connect the Subaru Select Monitor.
  NOTE: For detailed operation procedures, refer to "Application help".
2. Turn the ignition switch to ON.
3. On <<Start>> display, select <<Diagnosis>>.
4. On <<Vehicle selection>> display, input the target vehicle information and select <<Confirmed>>.
5. On <<Main Menu>> display, select <<Each System>>.
6. On <<Select System>> display, select <<Brake Control System>> and select <<Enter>>.
7. On <<Select Function>> display, select <<Work Support>>.
8. On <<Work Support>> display, select <<Writing of parameter: SSM to ECM>>.
Open the file saved in the <<Reading of parameter: ECM to SSM>> procedure.
When the confirmation screen indicating the vehicle information appears, check that the correct applied model and grade are displayed and click the <<OK>> button.