DTC P05A2: Active Grille Air Shutter "A" Control Circuit/Open: Notes

DTC detecting condition: 

Immediately at fault recognition

1. CHECK DTC. 
   1. Perform the Clear Memory Mode using the Subaru Select Monitor. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Clear Memory Mode>OPERATION
   2. Turn the ignition switch to OFF, and wait for approx. 30 seconds.
   3. Turn the ignition switch to ON.
   4. Check for DTC. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>READ DIAGNOSTIC TROUBLE CODE (DTC)

   Is DTC P05A2 displayed? (Current malfunction)

   Yes:  Replace the active grille shutter. Ref. to COOLING(H4DO)>ACTIVE GRILLE SHUTTER

   No:  Using the Subaru Select Monitor, perform the operation check for the active grille shutter to make sure that its open and close operation can be completed properly.

   NOTE: For detailed operation procedures, refer to the "Active Test". Ref. to ENGINE (DIAGNOSTICS) (H4DO)>ACTIVE TEST