LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control/Fuel System (H6DO)) >> Oil Temperature Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the collector cover.
    1. Carefully pull up the rear of collector cover at two positions (A).
    2. Carefully pull up the front of collector cover at two positions (B) while moving it forward.
      G11585612Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Disconnect the connector (A) from the oil temperature sensor, and remove the oil temperature sensor from the cylinder block.
    G10263624Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals