Except For C0 And C5 Models
Diagnosis start condition:
- Battery voltage is 10 V or more.
- The remote engine starter was not used to start the engine.
DTC detecting condition:
Reference code incompatibility between body integrated unit and ECM
Trouble symptom:
- Engine will not start.
- The security indicator illuminates.
- CONFIRM NUMBER OF REGISTERED IMMOBILIZER KEY
.
Confirm the number of registered immobilizer key. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.
Is the number of registration 0?
Yes: Go to 2.
No: Go to 3.
- PERFORM IMMOBILIZER SYSTEM REGISTRATION
.
Register the immobilizer system. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.
Is registration complete?
Yes: Finish the diagnosis.
No: Go to 3.
- PERFORM ECM REGISTRATION
.
Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.
Is registration complete?
Yes: Finish the diagnosis.
No: Go to 4.
- CHECK DTC
.
- Perform the Clear Memory Mode. Ref. IMMOBILIZER (DIAGNOSTICS)>Clear Memory Mode .
- Read the DTC of the ECM. Ref. IMMOBILIZER (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC) .
Are DTCs other than DTC B1571 displayed?
Yes: Perform the diagnosis of DTCs other than B1571.
No: Go to 5.
- PERFORM ECM REGISTRATION
.
- Replace the ECM. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>ENGINE CONTROL MODULE (ECM) . Ref. to FUEL INJECTION (FUEL SYSTEMS) (H6DO)>ENGINE CONTROL MODULE (ECM)
- Perform ECM registration. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume.
Is registration complete?
Yes: Finish the diagnosis.
No: Refer to "Correspondence table when registration is not possible" in the "REGISTRATION MANUAL FOR IMMOBILIZER" provided as a separate volume. If the registration still does not work properly, replace the body integrated unit. Ref. to SECURITY AND LOCKS>BODY INTEGRATED UNIT .