Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch to ON. (Engine OFF)
- Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. Ref. to ENGINE (DIAGNOSTICS) (STI)>Subaru Select Monitor>OPERATION>DISPLAY CURRENT ENGINE DATA (NORMAL MODE)
.
Accelerator Pedal Sensor Accelerator Pedal Opening Angle Signal Standard Main 0.0% 0.4 - 1.0 V 100.0% 2.4 - 3.7 V Sub 0.0% 0.3 - 1.1 V 100.0% 2.3 - 3.8 V