Execution Condition
EXECUTION CONDITION - DIAGNOSTIC METHOD 1 AND 2
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | > 75.1kPa (563mmHg, 22.2inHg) |
| Time of main feedback operation | ≥ 3000ms |
| Engine speed | ≥ 1000rpm |
| Amount of intake air | ≥ 10g/s (0.35oz/s) |
For TYPE RA, the diagnostic method 2 is not used.
EXECUTION CONDITION - DIAGNOSTIC METHOD 3 (EXCEPT FOR TYPE RA)
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | > 75.1kPa (563mmHg, 22.2inHg) |
| Main feedback | In operation |
| Vehicle speed | > 40km/h (24.9MPH) |
| Engine speed | ≥ 1000rpm and < 4000rpm |
| Amount of intake air | ≥ 10g/s (0.35oz/s) and < 40g/s (1.41oz/s) |
| Status of catalytic converter monitor | Not under diagnosis |
EXECUTION CONDITION - DIAGNOSTIC METHOD 3 (TYPE RA)
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | > 75.1kPa (563mmHg, 22.2inHg) |
| Main feedback | In operation |
| Vehicle speed | > 40km/h (24.9MPH) |
| Engine speed | ≥ 1000rpm and < 3200rpm |
| Amount of intake air | ≥ 10g/s (0.35oz/s) and < 30g/s (1.06oz/s) |
| Status of catalytic converter monitor | Not under diagnosis |