October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

When The CROSSMEMBER COMPL Front Was Removed

Use a new O-ring to install the oil level switch, and install the clip to the oil pan upper.
NOTE: Apply engine oil to O-ring.

Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
Secure the oil level switch harness to the front engine oil cooler pipe with clip, and connect the connector.
Install the crossmember COMPL front. Ref. to FRONT SUSPENSION>CROSSMEMBER>INSTALLATION .