Camshaft Position Sensor: Removal: Exhaust

RH SIDE.
1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Lift up the vehicle.
3. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
4. Disconnect the connector (A) and remove the camshaft position sensor.
Courtesy of SUBARU OF AMERICA, INC.
LH SIDE.
1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Lift up the vehicle.
3. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
4. Disconnect the connector (A) and remove the camshaft position sensor.
Courtesy of SUBARU OF AMERICA, INC.