Typical Enabling Conditions
Transmission M/T
VOLTAGE SPECIFICATION
| Overlap prohibited DTC | P0500 (Vehicle Speed Sensor (VSS)) |
|---|---|
| Battery Voltage | 10.9V or more |
| Number of the driving condition change from A to B described below: | 1 time |
| A. All of the following conditions are met: | (a), (b) |
| (a) Vehicle speed | 0 km/h {0 MPH} or less |
| (b) Engine speed | 550 to 880 r/min |
| B. All of the following conditions are met: | (a), (b) |
| (a) Vehicle speed | 64 km/h {40 MPH} or more |
| (b) Engine speed | 1700 to 2700 r/min |
Transmission A/T
VOLTAGE SPECIFICATION
| Overlap prohibited DTC | P0616, P0617, P0512 (starter switch circuit with push start system) U0073, U0101, U0402 (CAN System) |
|---|---|
| Starter relay feedback voltage (Starter relay is not energized) | Battery voltage xless than 0.35 V |
| Battery voltage | 10.9V or more |
P0851
ENGINE SPEED SPECIFICATION
| Engine speed | 500 RPM or more |