LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> BRZ Limited, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics) (2 Of 3) >> EFI System (FA20) >> DTC P0512: Starter Switch Circuit High input; DTC P0616: Starter Relay Circuit Low; DTC P0617: Starter Relay Circuit High; DTC P081A: Starter Cut Relay System Circuit (Low) >> Description of functions >> Test drive
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test drive

Perform test drive to check if the DTC recurs.

  1. Connect the SSM4 to the DLC3.
  2. Turn the ignition switch to ON.
  3. Turn on the SSM4.
  4. Follow the SSM4 on-screen instructions to clear the DTCs. (Refer to CHECKING/CLEARING DTC )
  5. Turn the ignition switch to OFF, and wait for 30 seconds.
  6. Turn the ignition switch to ON.
  7. Turn on the SSM4.
  8. Start the engine.
    NOTE: If the engine cannot be started, crank the engine for 10 seconds or more.
  9. Idle the engine for 20 seconds or more.
  10. Follow the SSM4 on-screen instructions to check the DTC.
scientia non olet · About LEMON Manuals