Malfunction Indicator Light Does Not Go Off
Diagnosis:
The malfunction indicator light circuit is shorted.
Trouble symptom:
Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.
- CHECK DTC
.
Read the DTC of engine or LAN system using the Subaru Select Monitor or a general scan tool. Refer to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .
Is DTC of engine or LAN system displayed?
Yes: Check the appropriate DTC using the "Diagnostic Trouble Code (DTC)". Refer to ENGINE (DIAGNOSTICS) (H4DO (EXCEPT FOR HEV))>DIAGNOSTIC TROUBLE CODE (DTC)>LIST . Refer to LAN SYSTEM (DIAGNOSTICS) (EXCEPT FOR HEV)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
No: Check the combination meter system. Refer to COMBINATION METER (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .