Power Rear Gate Control Module: Installation
CAUTION:
When the power rear gate CM is replaced, set the memory height function again. (Refer to the appropriate Service Information for details.)
- Install the power rear gate Control Module.NOTE: Connect the connectors in reverse order of removal.
- Install the trim panel rear pillar UPR LH and the trim panel assembly apron LH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
- Install the rear seat cushion assembly. Ref. to SEATS>REAR SEAT>INSTALLATION .
- Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY .